Fence Gates in Tyler, TX
Gates swing every day and hang their whole weight on one post, so they wear out first. In Tyler we build and repair fence gates of every size: a 4-foot backyard gate, a double gate for the zero-turn and the trailer, or a pipe gate across a county-road driveway.
A gate that scrapes the ground or has to be lifted to latch usually comes back into line with a new hinge post, a brace or better hardware. The rest of the fence can stay.
Free gates quote
Takes about 30 seconds. Prefer to talk? (903) 618-3812
Please add your name and a phone number we can reach you at, then send again.
Why Tyler gates sag
Gate posts in Tyler fight two things: clay that softens after a week of rain, and a heavy wood gate hanging off one side. The post slowly tips toward the opening and the latch side drops. A deeper, wider footing on the hinge post, a galvanized steel post, or a steel gate frame faced with wood fixes the cause instead of the symptom.
Measure the widest thing that has to pass through. With Lake Tyler and Lake Palestine both nearby, plenty of driveways hold a boat, and a boat on a trailer needs far more room than a riding mower. Two leaves with a drop rod hold up better than one wide leaf, and an opener is easier to add later if the post and wiring are planned now.
Gate types we install
Backyard walk gates
Three- to 4-foot gates built to match the fence, with spring hinges if pets are involved.
Double drive gates
Paired leaves for 8- to 14-foot openings, with a drop rod and a center stop.
Steel-framed gates with wood face
Pickets matched to your fence on a welded frame that won't rack out of square.
Pipe and tube gates
Galvanized tube gates hung on braced posts for pasture entrances and long rural drives.
What a gate costs
- Opening width, and one leaf or two.
- Frame: wood, steel-framed or all metal.
- Hardware: heavy hinges, self-closing springs, pool latches or locks.
- A new hinge post with a deeper footing.
- Openers, solar panels and keypads.
Fence Gates questions
How do I stop a wood gate from sagging?
Start with the hinge post, not the gate. If the post leans, it needs resetting in a deeper footing or replacing with steel. After that, a diagonal brace running uphill from the bottom of the hinge side to the top of the latch side, or a turnbuckle anti-sag kit, keeps the frame square.
Can an opener go on my existing gate?
Often, if the gate is metal, square and hung on solid posts. Openers add strain, so a sagging wood gate usually needs a steel frame or a rebuild first. Power is the other question: run a line out to it or use a solar kit.
More fence services
Fence Gates in Tyler: get your free quote
Whether it's a backyard gate that drags or a new entrance for the boat trailer, tell us about it by phone or form and a free visit gets scheduled.